ADEMCO VISTA 10 Instrukcja Konfiguracji Pobierz pdf (Strona 43)

Section 5 - Zone Programming

5–9

PROMPT VALID ENTRIES EXPLANATION

Keyd A022-4063 –

Rcvd A022-4064 3

Not Confirmed

If the serial number transmitted

does not match

the

serial number entered, a display similar to the one at left

appears.

If it doesn't match,

press any button on the transmitter

once again. If a match is not obtained, press the [#] key

and then enter the correct serial number (steps 7 through

10 above).

If the serial number transmitted

matches

the serial

number entered, the keypad beeps 3 times and returns

you to step 7 above to enter the starting zone for the next

wireless key.

After all wireless keys are programmed, enter 00 at the

ENTER START ZONE prompt.

NOTE:

Following the successful enrollment of each wireless device, remove

ONE

of the serial number labels

from the device and affix it in the appropriate column on the ENROLLED TRANSMITTERS worksheet of

the Programming Form. Then enter the other information (zone number, zone type, loop number, etc.)

relevant to that device. This information will be useful if any troubleshooting is needed later on. The

installer may want to consider leaving this worksheet at the site (in the panel cabinet).

Wireless Key Predefined Default Templates

YOU MUST

PROGRAM

THIS BUTTON

LOOP 4

LOOP 3

ENROLL AS "BR"

LOOP 1

LOOP 2

OFF

Figure 5-2. 5804 Wireless Key

Transmitter

LOOP 3

LOOP 1

LOOP 2

LOOP 4

(YOU MUST

PROGRAM

THIS BUTTON)

RED/YELLOW

LED

•

GREEN/YELLOW

LED

ENROLL AS "BR"

Figure 5-3. 5804BD 2-Way Wireless

Key Transmitter

For 5804

For 5804BD

Loop

Function

Zone Type

Loop

Function

Zone Type

1 No Response 23 1 No Response 23

2 Disarm 22 2 No Response 23

3 Arm AWAY 21 3 Arm AWAY 21

TEMPLATE 1

4 No Response 23

TEMPLATE 4

4 Disarm 22

Loop Function Zone Type

1 No Response 23 1 No Response 23

2 Disarm 22 2 Arm STAY 20

3 Arm AWAY 21 3 Arm AWAY 21

TEMPLATE 2

4 Arm STAY 20

TEMPLATE 5

4 Disarm 22

Loop Function Zone Type

1 24-hour Panic 07

2 Disarm 22 2 Arm STAY 20

3 Arm AWAY 21 3 Arm AWAY 21

TEMPLATE 3

4 Arm STAY 20

TEMPLATE 6

4 Disarm 22

Note:

These transmitters are

not intended for use in

UL installations.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 79 80

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO VISTA 10 Instrukcja Konfiguracji Strona 43

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO VISTA 10