ADEMCO VISTA 10 Instrukcja Konfiguracji Pobierz pdf (Strona 32)

VISTA-10SE Installation and Setup Guide

4-8

If Priority (

✱

93, 2nd entry) is…

And message is… Then…

Acknowledged before delay expires Message is removed from queue and no message is sent

to LRR.

Primary Phone No. ("0" entered)

Not acknowledged before delay

expires

Message is sent to both the Primary Phone Number and

LRR.

Acknowledged before delay expires Message is removed from queue and no message is sent

to Primary Phone Number

Long-Range Radio ("1" entered)

Not acknowledged before delay

expires

Message is sent to both the Primary Phone Number and

LRR.

FIELD TITLE and DATA ENTRIES EXPLANATION

Download Information (

✱

94,

✱

95)

✱

Download Phone Number

Enter up to 12 digits;

0–9; # +11 for

“

✱

,” # +

12 for “#,” # + 13 for a pause.

Do not fill unused spaces.

End field by entering

✱

To clear entries from field, press

✱

Ring Detection Count For Downloading

0 = disable station-initiated download

1-14 =number of rings (1-9, #+10=10,

#+11=11, #+12=12, #+13=13, #+14=14,

15 = answering machine defeat (#+15=15)

This field permits programming the number of rings before

the control picks up the phone line (1-14 rings).

Refer to chart that follows and program this field

accordingly.

VIP

Module

Answering

Machine

Downloading

Field

✱

Yes No No Set for value other than 0 (1–14). This will

enable the control panel to answer the phone

call. Otherwise, it will not be possible to access

the VIP Module.

Yes Yes No Set for a value higher than the number of

rings for which the answering machine is set.

Example: If machine is set for 4 rings, use a

value of 5 or higher. This is recommended so

that the VIP Module can still be accessed if the

answering machine is turned off and does not

answer the phone call.

Yes No Yes Set for value other than 0 (1–14).

Yes Yes Yes Enter 15 to bypass answering machine.

No No No Enter 0.

No No Yes Enter 1–14.

No Yes Yes Enter 15. See Important Note below.

NOTE:

If “15” is entered in field

✱

95 to bypass an answering machine, and a 4285/4286 VIP Module is

included in the installation, you should note the following:

When calling in from an off-premises phone (to receive a status report or execute a command), the user

should make the initial call, allow 1 to 3 rings only, and hang up. Then call in again. The VIP Module will

now seize the line, and 2 long tones will be heard, followed by the usual voice prompt for the 2-digit phone

access code. If this procedure is not followed, VIP Module operation will not be possible.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 79 80

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO VISTA 10 Instrukcja Konfiguracji Strona 32

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO VISTA 10