ADEMCO Security System VISTA-15CN Instrukcja Konfiguracji Pobierz pdf (Strona 97)

Section 19 - Alpha Descriptor Programming

19–3

✳ ZN 01 BACK

DOOR

Flashing Cursor if “6”

is pressed (system is

ready for next word)

9. Press

to accept the selected word.

NOTE:

If these are the only words/numbers you are using for the

descriptor, press

instead of

to save them in memory.

10. The two words/numbers in our example have now been entered.

Note, however, that up to three words/numbers may be entered

(provided the number of characters fit on the screen).

Press 8 to

save all words in memory.

Summary Display

✳ ZN 01 BACK

DOOR

The flashing cursor disappears, indicating that the word(s) are

stored in memory for that zone, as shown in the summary display

at the left.

11. To enter a descriptor for the next zone, press

✱

plus the desired

zone number (for example

✱

). The summary display that

followed step 4 appears. Now repeat Steps 6 through 10 for the

descriptor for the next zone.

12. To exit the alpha descriptor mode, press

at the summary

display.

Alpha Pgm

This prompt is displayed.

13. Press

✱

to exit the

Programming

mode.

Adding Custom Words/Numbers (not annunciated by the 4285/4286 VIP Module)

You can add up to 10 installer-defined words/numbers to the built-in vocabulary. Each of the

10 words/numbers can actually consist of a word string of one or more words/numbers, but no

more than

ten

characters can be used for each word or word string.

When adding Custom Words, the keypad keys perform the following functions:

[4] Moves cursor one space to the left.

[6] Moves cursor one space to the right.

[8] Saves the new word in the system's memory.

1. Perform steps 1, 2, and 3 of “Programming Zone Descriptors”

on a previous page.

Select Custom Word mode (enter

) when the prompt

CUSTOM WORD ?

is displayed.

2. Enter the number (

–

) of the custom word or word string to be created (for example, if

you are creating the first custom word or word-string, enter

; for the second, enter

etc.). A cursor now appears at the beginning of the second line.

3. Refer to the Character Chart of letters, numbers, and symbols on a following page.

Press [#], followed by the 2-digit entry for the first letter you would like to display

(for

example,

for “A”).

Press [

] to advance the cursor to the right if this entry is correct or repeat this step if the

entry is incorrect.

4. Repeat Step 3 to create the desired word(s). Note that the [4] key can be used to move the

cursor to the left, if necessary. Remember no word or word-string can exceed 10

characters.

5. Press [8] to save the custom word(s) and return to the

CUSTOM WORD ?

display.

Repeat Steps 2–5 for other custom words to be entered. To change a custom word, just

overwrite it. If no more are to be entered now, press

to return to the Program Alpha ?

prompt. The custom word(s) are automatically added to the built-in vocabulary.

When zone descriptors are being entered as described in Step 6 of “Programming Zone

Descriptors,” the custom word numbers are 245 to 254 for words 1 to 10, respectively.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 131 132

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO Security System VISTA-15CN Instrukcja Konfiguracji Strona 97

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Security System VISTA-15CN