ADEMCO Vista AT Podręcznik Użytkownika Pobierz pdf (Strona 8)

– 8 –

Disarming and Silencing Alarms

Disarming • Security code + [1] OFF

• The “READY” indicator lights if all zones are secure

• The keypad emits a single tone to confirm that the system is disarmed.

To Silence a • Security code + [1] OFF

Burglary Alarm • The “READY” indicator lights if all zones are secure

• The keypad emits a single tone to confirm that the system is disarmed.

To Silence a • Simply press the OFF key

Fire Alarm • The “READY” indicator lights if all zones are secure

• The keypad emits a single tone to confirm that the system is disarmed.

Memory of • When an alarm condition occurs, the keypad displays the number(s) of the zone(s)

Alarm that caused the problem, and displays the type of alarm.

• To Clear Alarm Display and/or “Alarm Canceled” display: Security code + [1] OFF

again

• Note the zone in alarm on the keypad display, and make that zone intact (close door,

window, etc.).

• The message remains displayed even after disarming the system, but can be cleared with

another “disarm” sequence.

IMPORTANT: If you return and the main burglary sounder is on, DO NOT ENTER, but CONTACT THE

POLICE from a nearby safe location.

If you return after an alarm has occurred and the main sounder has shut itself off, the keypad will beep rapidly

upon your entering, indicating that an alarm has occurred during your absence.

LEAVE AT ONCE, and CONTACT THE POLICE from a nearby safe location

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Brak uwag

ADEMCO Vista AT Podręcznik Użytkownika Strona 8