ADEMCO Vista AT Podręcznik Użytkownika Pobierz pdf (Strona 16)

– 16 –

Creating Schedules (cont’d)

11. Select the randomize option, if desired: 0 = no; 1 = yes

If selected, the schedule times will vary within 60 minutes of the “hour”

time. For example, if a schedule is set to start at 6:15, it will do so the first

time 6:15 arrives, but on subsequent days it will start anytime between

6:00 and 6:59

This feature is typically used for lighting control to make an unoccupied

facility appear occupied during extended absences.

Press [∗] to return to the ENTER SCHED No. prompt.

RANDOMIZE

0=NO 1=YES X

Child-Not-Home

Paging

• You can program a schedule that causes a pager report to be sent to Pager 1 phone

number if the system is not DISARMED by the scheduled time (see event “03”). The

message sent is:

777– 7777 .

For example, a working parent might want a message to be sent to a pager if their

child did not arrive home from school and disarm the system by a certain time.

NOTE: Your installer must program the control for pager reporting before you can use

the child-not-home scheduling option (installer must program pager number

and report options).

Time and Date Functions

Viewing the Time

and Date

• Master Code+[#] + [6] [3], or if programmed, press the designated function key.

• The system lets you view its time and date setting.

• The display remains on for about 30 seconds.

To Set the Time and

Date

• Master Code+[#] + [6] [3], then press [∗] while the time/date is displayed.

• A cursor appears under the first digit of the hour.

NOTE: To move cursor ahead, press [∗]. To go back, press [#].

• Enter the 2-digit hour setting; enter the 2-digit minute setting.

• Enter the last two digits of the current year.

• Enter the 2-digit month setting (01-12); enter the 2-digit day setting (01-31).

• Press [∗] to accept the settings and continue.

The Clock Adjustment prompt is displayed. This prompt lets you add or subtract up

to 59 seconds per day, if needed, to keep the real-time clock accurate.

• Press [0] to add seconds per day, or press [1] to subtract seconds per day.

• Enter the desired number of seconds per day (01-59) to add or subtract.

• Press [∗] to accept the settings and exit. This mode automatically exits after 10

seconds.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO Vista AT Podręcznik Użytkownika Strona 16

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Vista AT