ADEMCO VIA 30+ Instrukcja Naprawy Pobierz pdf (Strona 79)

15–5

Example 1.

Pager displays: 1234–911–004

This indicates that Subscriber No. 1234’s system is reporting an Alarm (911),

due to zone 4 being faulted (004).

Example 2.

Pager displays: 1234–001–005

This indicates that Subscriber No. 1234’s system is reporting an opening (001)

by User 5 (005).

Note that no restore reports are sent to the pager.

Important

: Do not use AAV when Paging or Alarm Reports are being sent to

a Secondary number. If this is done, the call to the Secondary number by the

communicator after the alarm report will prevent the AAV from taking control

of the phone line, and the AAV “Listen in” session cannot take place.

Press

✱

48 15-SECOND DIALER DELAY, BURGLARY

Enter 0 for no, or 1 for yes. Default is 0 (no delay).

Press

✱

49 PERIODIC TEST REPORT

Select the desired test report interval.

0 = none; 1 = 24 hours; 2 = weekly; 3 = 30 days. Default is 0

(none). Test Report Code entered in field

✱

64 is sent.

Reports with Subscriber No.

Press

✱

50 SESCOA/RADIONICS SELECT

0 = Radionics (0–9, B–F reporting)

1 = SESCOA (0–9 only reporting)

Select 0 for all other formats. Default is 0.

TO PROGRAM SYSTEM

STATUS AND

RESTORE REPORT

CODES

(

✱

60 –

✱

68,

✱

70 –

✱

75)

With a 3+1 or 4+1 Standard Format: Enter a code in the

first digit

box:

1–9, 0, B, C, D, E, or F. Enter "# + 10" for 0, "# + 11" for B, "# + 12" for C,

"# + 13" for D, "# + 14" for E, "# + 15" for F.

A "0" (

not

"# + 10") in the

first digit

box will disable a report.

A "0" (

not

"# + 10") in the

second digit

box (if any) will result in automatic

advance to the next field when programming.

With an Expanded or 4+2 Format: Enter codes in

both

boxes (1st and 2nd

digits) for 1–9, 0, or B–F, as described above.

A "0" (

not

"# + 10") in the

second

box will eliminate the expanded message

for that report.

A "0" (

not

"# + 10") in

both

boxes will disable the report.

With Ademco Contact ID Reporting: Enter any digit (other than "0") in the

first

box, to enable zone to report This is an "enabling" code only and is

disregarded in the actual reporting to the central office. Entries in the

second

boxes will be ignored.

A "0" (

not

"# + 10") in the

first

box will disable the report.

Examples:

For Code 3 (Single Digit), enter: 3 0

For Code 32 (Two Digits), enter: 3 2

For Code B2 (Hexadecimal) enter: # + 11 2

Press

✱

60 TROUBLE REPORT CODE

This will be sent if a zone goes into trouble.

Press

✱

61 BYPASS REPORT CODE

This will be sent when a zone is manually bypassed.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 103 104

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO VIA 30+ Instrukcja Naprawy Strona 79

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO VIA 30+