ADEMCO VIA 30+ Instrukcja Naprawy Pobierz pdf (Strona 12)

2 –2

4204, 4219, or 4229/

Expansion Unit

(if installed in cabinet)

1. Insert self-tapping screws (provided) in two adjacent raised cabinet tabs.

Leave the heads projecting 1/8".

2. Hang the unit on the screw heads via two of the slotted holes at the rear of

its housing, as shown in Figure 2.

3. The expansion unit's cover can be left off if the unit's DIP switch is set with

its position 1 "ON" (to the right) as shown in its instructions. The tampered

cover is necessary for installations outside of the control's cabinet.

TAMPERE

NOT

TAMPERED

DETAIL C

4219/4229

COVER TAMPER

JUMPER

DETAIL A

SIDE VIEW OF

BOARD SUPPORTING SLOTS

CIRCUIT

BOARD

CABINET

DETAIL B

SIDE VIEW OF

LONG MOUNTING CLIPS

CONTROL

CIRCUIT

BOARD

Figure 2. Installing The PC Board in the Cabinet Alone, or (if used), with

a 4204, 4219, or 4229 Module.

Figure 3. Installing The PC Board And RF Receiver Together In The Cabinet

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 103 104

Brak uwag

ADEMCO VIA 30+ Instrukcja Naprawy Strona 12