ADEMCO 4120XM Podręcznik Użytkownika Strona 31
- Strona / 80
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
To Delete a lemp;~d~
1. Enter Master Code
.
.
2. Press CODE key
3. Enter User # to be deleted
4 Enter Master Code.
Assigning or
● User 3 can only assignor delete temporary codes for Users 04 through 69.
Deleting Temporaty
Codes By User 3
To Assign A Temporary Code:
1.
Enter User 3’s Code
2. Press CODE key
3. Enter User # (04-69)
4 Enter 4-digit temporary code to be assigned.
To Delete a Temporary Code:
1.
Enter User 3’s Code
2. Press CODE key
3. Enter User # to be deleted
4 Enter User 3’s Code.
CONSOLE KEYPAD FUNCTIONS
General Information
The keypad allows the user to arm and disarm the system, and perform other
system functions, such as bypassing zones. On Alpha consoles, the user can
also view messages from the central station and display zone descriptors.
Status Displays
On all consoles, zone and system conditions (system ready or not ready for
arming, fire and burglary alarms, troubles, bypasses) are displayed in the Display
Window.
Four Modes of Burglary
The system provides four modes of burglay protection: STAY, AWAY, INSTANT,
Protection and MAXIMUM. See SUMMARY OF ARMING MODES table. In addition, if any
zones are faulted prior to arming (NOT READY condition), the console can
display them one at a time, and specific zones can be selectively bypassed.
Alarm Sounding &
When an alarm occurs, console sounding and external sounding will
occur, and
Displays
the zone(s) in alarm will be displayed on the console. Pressing any key will
silence the console sounder for 10
seconds. Disarming the system (security code
+ OFF key) will silence both console and external sounders.
Memory of Alarm
When the system is disarmed, any zones that were in an alarm condition during
the armed period will be displayed
(memory of alarm). To clear this display,
simply repeat the disarm sequence (enter the security code and press the OFF
key). See RECALLING ALARM & TROUBLE MESSAGES.
Chime Mode
The consoles also include chime annunciation which, when on, will produce 3
short beeps from the console(s) when any zone is faulted (and display that zone).
Panic (Emergency) Keys
Panic keys are provided for emergency situations (which will produce silent,
audible,
fire or auxiliary alarms), and which will also notify the central station, if
that service is connected.
Quick Arm
Note that if QUICK ARM is enabled
(in field *29), the [#] key can be pressed
instead of entering the security code for any of the arming procedures (Away,
Stay, Instant, Maximum).
-31-
- INSTALLATION 1
- INSTRUCTIONS 1
- I%U)EMCOI 1
- CONGRATUMTIONS! 3
- LIST OF ILLUSTRATIONS 6
- SUMMARY OF SYSTEM FEATURES 7
- BASIC 8 HARD-WIRED ZONES 10
- Zones 2-8 11
- TS2 HEAOER 12
- 4219 Zone Expander ● 13
- GeneraI Information 14
- /w%k%’wrO 15
- Wireless Zone Types 17
- Receiver Fault 18
- Annunciation 18
- 00000000 20
- ----- 21
- REMOTE CONSOLES 22
- I I~1 /l 23
- EXTERNAL SOUNDERS 24
- PHONE CONNECTIONS 24
- Ground Start Module 25
- OFSOAROlNSERTEO 26
- SIOEVIEW 26
- POWERING THE SYSTEM 27
- ❑ & ❑ (12V + and -) 28
- ❑ , 12V+ & Ground Return) 28
- SECURITY ACCESS CODES 29
- Assigning or 30
- Deleting Temporary 30
- Codes By User 2 30
- (Master User) 30
- CONSOLE KEYPAD FUNCTIONS 31
- [*I+ [W I B 32
- TROUBLE CONDITIONS 33
- Other Trouble 34
- Conditions 34
- Power Failure 34
- Split/Duai Reporting 35
- Ademco Low Speed 35
- Sescoa/Radionics 35
- 4+2 Reporting 35
- 4+2 Express 36
- Ademco High Speed 36
- Reporting 36
- No effect 38
- Programming Procedures 39
- Programming Steps 40
- Easy-To-Program 41
- Communication 41
- 010 BYPSSRst 43
- EIIEHIIE mHIIlsta*fd 44
- Klmmlmmtml 46
- (Q=no/l=yes) 48
- (Q/1 /2f3) 50
- (00;01-15) 53
- 1.34 communication 55
- Programming Zone 57
- Adding Custom 58
- Creating A Custom 58
- Message Display 58
- How Does 60
- Downloading Work? 60
- What Can Be Done 61
- Panel IS ● Bypass a Zone 61
- How Secure Is 61
- RED BLUE WHITE 62
- Using The Test 63
- Turning The System 64
- Over To The User 64
- Remote Consoles 65
- Hard-Wired Zones, 1-8 65
- Wireless 66
- Communications 67
- X 4.75”H X 1.25” D 69
- (DOC) STATEMENT 73
- ADEMCO LIMITED WARRANTY 75
- N6493V1 10/93 76
- 4120XM PROORAMM8NQ FORM 77
- ❑ clclclclclclcl 78
- ❑ 0000000 78
- ❑ lmnclclcl 78
- ❑ lnciclnclcn 79
- DISABLETROUSLESOUNDERFORRF 80
- DivisionOf PittWytirf.watia’t 80
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO 4120XM
(64 strony)
(56 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.064 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji