ADEMCO Vista-128B PLUS Instrukcja Konfiguracji Pobierz pdf (Strona 39)

– 39 –

PROMPT

EXPLANATION

01 ADD ZONE #

000=QUIT 000

Using 3-digit entries, enter each zone to be included in this zone list. Press [✱] after you enter each zone

number.

When you have entered all zones, enter 000.

Press [✱] to continue.

01 Del Zn LIST ?

1=YES 0=NO 0

Enter 0 to save this zone list. Enter 1 to delete it.

01 DEL ZONES ?

1=YES 0=NO 0

Enter 1 to delete one or more zones in that zone list. Enter 0 if no changes are necessary. If you enter 1,

the following screen appears; otherwise, the "Enter Zone LIST" prompt reappears.

01 Zn to DELETE ?

000=QUIT 000

Enter each zone number to be deleted from the zone list, pressing [✱] after each number.

VIEW Zn LIST ?

00=QUIT 00

This display appears if you pressed 00 at the “Enter Zone LIST” prompt. Enter the zone list number that you

wish to view.

Press [✱] to continue.

01 ASSIGNED ZONE

000=QUIT 000

Press [✱] to scroll through all zones in that list. Enter 000 +[✱] to quit.

Press [1] to exit Menu Mode.

Press ✱99 to exit Program Mode.

Relay Voice Descriptors

If you are using the 4285/4286 VIP Module, voice descriptors can be programmed for outputs 1-32 (even though the system

has 96 outputs, only 1-32 can have a Relay Voice Descriptor programmed). These descriptors are announced by the voice

module when you access the relays via the # 70 Relay Access Mode over the telephone.

Each voice descriptor can consist of up to 3 words selected from the Relay Voice Descriptors and Custom Word Substitutes

Vocabulary list (later in this section).

The index numbers from this vocabulary list are to be used for relay voice descriptors only. For normal

system voice annunciation (e.g., alarms, troubles, status), use the highlighted words in the alpha vocabulary

list in the

Alpha Programming

part of this guide.

To enter relay voice descriptors, do the following:

1. From Data Field Programming mode, press #93 to display the "ZONE PROG?" prompt.

2. Press [0] (NO) to each menu option until the "RLY VOICE DESCR?" prompt is displayed. Follow the instructions below.

While in this mode, press [✱] to advance to next screen. Press [#] to back up to previous screen.

PROMPT

EXPLANATION

RLY VOICE DESCR?

1=YES 0=NO 0

Press [1] to program voice descriptors for relays.

PROMPT

EXPLANATION

ENTER RELAY NO.

00=QUIT 01

Enter the 2-digit relay number (01-32) for the relay desired, or enter 00 to quit Relay Voice Descriptor

Programming Mode.

Press [✱]

01 ENTER DESC d1

From the Relay Voice Descriptors and Custom Word Substitutes Vocabulary list, enter the 3-digit index

number for the first word of the relay descriptor phrase.

Press [✱] to accept entry.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO Vista-128B PLUS Instrukcja Konfiguracji Strona 39

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Vista-128B PLUS