ADEMCO VISTA-250FBP Instrukcja Konfiguracji Pobierz pdf (Strona 39)

– 39 –

Relay Voice Descriptors

Each voice descriptor can consist of up to 3 words selected from the Relay Voice Descriptors and Custom Word Substitutes

Vocabulary list (later in this section).

The index numbers from this vocabulary list are to be used for relay voice descriptors only. For normal

system voice annunciation (e.g., alarms, troubles, status), use the highlighted words in the alpha vocabulary

list in the

Alpha Programming

part of this guide.

To enter relay voice descriptors, do the following:

1. From Data Field Programming mode, press #93 to display the "ZONE PROG?" prompt.

2. Press [0] (NO) to each menu option until the "RLY VOICE DESCR?" prompt is displayed. Follow the instructions below.

While in this mode, press [✱] to advance to next screen. Press [#] to back up to previous screen.

PROMPT

EXPLANATION

RLY VOICE DESCR?

1=YES 0=NO 0

Press [1] to program voice descriptors for relays.

ENTER RELAY NO.

00=QUIT 01

Enter the 2-digit relay number (01-32) for the relay desired, or enter 00 to quit Relay Voice Descriptor

Programming Mode.

Press [✱]

01 ENTER DESC d1

From the Relay Voice Descriptors and Custom Word Substitutes Vocabulary list, enter the 3-digit index

number for the first word of the relay descriptor phrase.

Press [✱] to accept entry.

01 ENTER DESC d2

From the Relay Voice Descriptors and Custom Word Substitutes Vocabulary list, enter the 3-digit index

number for the second word of the relay descriptor phrase. If second word is not desired, press [000].

Press [✱] to accept entry.

01 ENTER DESC d3

From the Relay Voice Descriptors and Custom Word Substitutes Vocabulary list, enter the 3-digit index

number for the third word of the relay descriptor phrase. If third word is not desired, press [000].

Press [✱] to accept entry. The “ENTER RELAY NO.” prompt appears. Enter the next relay number to be

programmed. When you have programmed all output devices, enter 00 to quit.

Enter ✱99 to exit Program Mode.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Brak uwag

ADEMCO VISTA-250FBP Instrukcja Konfiguracji Strona 39