ADEMCO Vista-20HW Instrukcja Naprawy Pobierz pdf (Strona 11)

100

●

Event Logging

●

Alarm output

●

The telephone lin;vofiage can be monitored to supervise the phone line

connection. The panel must be connected to a proper earth

ground or you will get a false line cut indication if this feature

is enabled.

The loss of the line can optionally cause a local display, or a display and

trouble sound.

Event Logging feature keeps a record of selected events in a history log

(UP to 48 events). All control and readout from the log is done via

Ademco V-LIN@ downloading software only.

Provides a 12VDC, 2 AMP output that can drive the compatible

sounders listed in the EXTERNAL SOUNDERS section (assumesa fully

chargedbatteryis connected).

Steady output for Burglary/Panic, or temporal pulse output (3 pulses –

pause – 3 pulses – pause -3 pulses. . .) for Fire

Uses current limiting circuitry for protection

Auxiliary

pow- Output

“ Provides 12VDC, 600 mA maximum. Uses current limiting circuitry for

protection.

“ This output interrupts for smoke detector reset if 4-wire smoke

detectors are used.

progralmnin~

“ Prograrqmed options are stored in electrically erasable, non-volatile

EEROM memory (information can be reprogrammed at any time and

will not be lost in the event of a power loss).

“ The system can be uploaded, downloaded, or controlled via an IBM

compatible computer, Ademco V-LINI@ downloading software and a

HAYES modem specified by Ademco.

Keypad programming consists of:

‘ Data field programming

“ Interactive (menu) mode programming

communication Formats

supfborted

● Ademco Low Speed (Standard or Expanded)

“ Sescoa/Radionics (Standard or Expanded)

● Ademco Express

● Ademco Contact ID

Zone Deecriptore

You can assign Alpha descriptors to all zones (usefil only when using

Alpha keypads and/or the 4285 VIP (VISTA Interactive Phone) module.

power Supply

Uses 1321/TF2, 11OVACplug-in transformer with 16.5VAC 25VA output,,

unless Powerline Carrier devices (ex. X-10 type) are used, in which case a

4300 Imansformer module must be used.

Back-up Battery

● Rechargeable (Gel type) 12VDC, 4AH minimum (Ademco No. 467).

-11-

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 99 100

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO Vista-20HW Instrukcja Naprawy Strona 11

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Vista-20HW