ADEMCO LYNX Podręcznik Użytkownika Pobierz pdf (Strona 8)

Remote Phone Control Operation

To remotely disarm system: + [1]

To remotely arm in AWAY mode: + [2]

To remotely arm in STAY mode: + [3]

To remotely arm in AWAY or STAY with NO DELAY:

+ [2] or [3] + [0]

To remotely activate X10 devices 1-6: [#] + [4] + device no.

To remotely activate X10 devices 7 & 8:

+ [#] + [4] + device no.

To remotely deactivate X10 devices 1-6: [#] + [7] + device no.

To remotely deactivate X10 devices 7 & 8:

+ [#] + [7] + device no.

To remotely bypass a zone: + [6] + zone no.

To remotely activate forced bypass: + [6] + [#]

Note: Force bypass option must be enabled.

To remotely check system status: [✴]

To end remote phone session: Hang up or

+ [9]

Speaker Phone Operation

Note: The ARMED and READY LEDs blink alternately when the Speaker Phone feature is active.

To place a call or answer a call using the speaker phone: [#] + AUX

To Flash (switch between two calls using call waiting): AUX

To hang up and exit speaker phone mode: OFF

To enable/disable (toggle) ringer: [#] + VOLUME + AUX

To return the keypad to telephone mode after disarming the system: [#] + AUX

REFER TO THE INSTALLATION AND SETUP GUIDE FOR THE LIMITATIONS OF THIS SYSTEM AND FOR

WARRANTY INFORMATION.

165 Eileen Way, Syosset, New York 11791

www.honeywell.com/security

‡K5966-2OŠ

K5966-2 9/06 Rev. A

1 2 3 4 5 6 7 8

Brak uwag

ADEMCO LYNX Podręcznik Użytkownika Strona 8