ADEMCO VISTA-20HWse Instrukcja Naprawy Pobierz pdf (Strona 39)

–39–

Type 06

24-hour Silent Alarm

This zone type sends a report to the Central Station but provides no keypad

display or sounding. This zone type is usually assigned to a zone containing an

Emergency button.

Type 07

24-hour Audible Alarm

This zone type sends a report to the Central Station, and provides an alarm

sound at the keypad, and an audible external alarm. This zone type is usually

assigned to a zone that has an Emergency button.

Type 08

24-hour

Auxiliary Alarm

This zone type sends a report to Central Station and provides an alarm sound at

the keypad. (No bell output is provided). This zone type is usually assigned to a

zone containing a button for use in personal emergencies, or to a zone containing

monitoring devices such as water or temperature sensors, etc.

Type 09

Supervised Fire

(With Verification on Zone

This zone type provides a fire alarm on short circuit and a trouble condition on

open circuit. The bell output will pulse when this zone type is alarmed. This zone

type is always active and cannot be bypassed. This zone type can be assigned

to a control panel basic wired zone or any zone in a wired zone expansion

module. When used with zone 1 on the panel, 2-wire smoke detectors can be

used. For an explanation of the “verification” function, refer to the “Operation”

paragraph in a previous section titled 2-Wire Smoke Detector Installation.

Note:ÊÊOnly hardwired zone 1 can be programmed as a fire zone in UL

ÊÊÊÊÊÊÊÊÊÊÊ installations.

Type 10

Interior w/Delay

This zone type gives entry delay #1 (using the programmed entry time), if tripped

when the panel is armed in the Away mode. Entry delay begins whenever

sensors in this zone are violated, regardless of whether or not an entry/exit delay

zone was tripped first.

No entry delay

is provided if tripped when the panel is

armed in the Maximum mode.

Exit

delay is present for

any

arming mode. This

zone type is bypassed when the panel is armed in the Stay or Instant

modes.

Type 23

No Alarm Response

This zone type can be used on a zone when an output relay action is desired, but

with no accompanying alarm (e.g., lobby door access).

Type 24

Silent Burglary

This zone type provides an instant alarm, with NO audible indication at any

keypad or external sounder, if the zone is faulted when the system is armed in

the AWAY, STAY, INSTANT, or MAXIMUM modes. This zone type is usually

assigned to all sensors or contacts on exterior doors and windows where bells

and/or sirens are NOT desired. A report is sent to the Central Station.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 83 84

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO VISTA-20HWse Instrukcja Naprawy Strona 39

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO VISTA-20HWse