ADEMCO Vista-128B PLUS Podręcznik Użytkownika Strona 23
- Strona / 80
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
– 23 –
Accessing Other Partitions (cont’d)
Global Arming Notes:
• When performing a Global Arm, if there are faults in any of the selected
partitions, the system will enter a Summary Mode. Faulted zones in all
the selected partitions will be displayed. These faults must be corrected
or bypassed. This Summary Mode will end in approximately 120 seconds
if no keys are pressed.
• When performing a Global Disarm, if any of the selected partitions has a
condition which would cause the keypad to beep (e.g., alarm memory or a
trouble condition), the system enters a Summary Mode and displays the
condition. This Summary Mode will end in approximately 120 seconds if
no keys are pressed.
Master Keypad Operation
A "Master" keypad is one that reflects the status of the entire system
(Partitions 1-8) on its display. This is useful because it eliminates the need
for a security officer in a building to have to "log-on" to various partitions
from one partition's keypad to find out where an alarm has occurred.
A description of a typical display follows:
SYSTEM 1 2 3 4 5 6 7 8
STATUS R R N N A T ✴ B
The status of each partition is directly below the partition number on the
display. Possible status indications include:
A = Armed Away S = Armed Stay M = Armed Maximum
I = Armed Instant R = Ready N = Not Ready
B = Bypassed/Ready ✴ = Alarm T = Trouble
F = Fire Alarm P = AC Power Failure L = Low System Battery
C = Comm Fail
To obtain more information regarding a particular partition, enter [✴] +
[Partition No.] (i.e., ✴4). This will allow viewing only of that partition. In
order to affect that partition, the user must log on with a code that has access
to that partition. Also, in order for a user of any partition to log onto the
"Master" partition (Partition 9) to view the status of all partitions, and to
perform any functions at the Master keypad, that user must have access to
all partitions. Otherwise, access will be denied.
- TABLE OF CONTENTS 3
- System Overview 5
- System Overview (cont’d) 6
- About The Keypads 10
- Functions Of The Keypad 11
- Entry/Exit Delays 14
- General Information 15
- Duress Code 15
- Quick Arming 15
- Authority Levels 16
- To Exit User Edit Mode 17
- To Add a User 18
- CODE 20
- READY 22
- Master Keypad Operation 23
- Common Lobby Operation 25
- Accessing Other Panels 27
- Multi-Panel View Mode 29
- Checking For Open Zones 31
- BYPASS 33
- (With Entry Delay ON) 36
- STAY 36
- Arming Perimeter Only 37
- (With Entry Delay OFF) 38
- INSTANT 38
- AWAY 39
- MAXIMUM 40
- Quick Exit 41
- Using the 1 OFF Key 42
- Memory of Alarm 42
- Using The Keyswitch 43
- Chime Mode 44
- Panic Keys 46
- Speed Key (Macros) 47
- Speed Key (Macros) (cont’d) 48
- Access Door Control 49
- Using #70 Relay Menu Mode 50
- Using Schedules 51
- Using Schedules (cont’d) 52
- Programming Device Timers 54
- Event Log Procedures 60
- Setting the Time and Date 61
- (To Be Conducted Weekly) 62
- Fire Alarm System 63
- Trouble Conditions 64
- Trouble Conditions (cont’d) 65
- Emergency Evacuation 68
- Maintaining Your System 69
- Routine Care 70
- (Alpha Display Keypads) 73
- WARNING! 77
- ÊK5895V3ÇŠ 80
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Vista-128B PLUS
(72 strony)
(132 strony)Whirlpool ECM 532 U manuales
Manuales del propietario y guías del usuario para Lavaplatos Whirlpool ECM 532 U.
Ofrecemos 1 manuales en pdf Whirlpool ECM 532 U para descargar gratis por tipos de documentos: Instrucciones de uso
Komentarze do niniejszej Instrukcji