ADEMCO Accord Instrukcja Użytkownika Pobierz pdf (Strona 2)

Important:

1. Ensure all system detectors are clear before proceeding.

2. Ensure all windows and doors are secure.

LED KEYPAD PROGRAMMING

Setting the System

FULL SET [1]

To FULL SET the system:

1. Enter the User Code.

2. Press 1 (Full Set).

A constant exit tone will sound. During the exit period, the DAY LED will flash and

the exit tone will become broken as the user passes detectors on the exit route. The

exit tone will become constant, when the last detector on the exit route has been

passed. Two confirmation beeps indicate that the system has set.

Note: To stop the system from setting during the exit period press Ö. When the

system has set, Ö will no longer function. Press # + 1 (Full Set) to

EASY SET the system, if available.

PART SET [2]

Selected areas will set using the Part Set function. The engineer will programme

which selected areas will set with user approval, (see System Settings).

To PART SET the system:

1. Enter the User Code.

2. Press 2 (Part Set).

A constant exit tone will sound. During the exit period, the DAY LED will flash and

the exit tone will become broken as the user passes detectors on the exit route. The

exit tone will become constant, when the last detector on the exit route has been

passed. Two confirmation beeps indicate that the system has set.

Note: To stop the system from setting during the exit period press Ö.

When the system has set, Ö will no longer function.

Press # + 2 (Part Set) to EASY SET the system, if available

ZONE LOCATION CHART

ZONE LOCATION RF (ON/OFF)

1 2 3 4 5 6 7 8

Brak uwag

ADEMCO Accord Instrukcja Użytkownika Strona 2