ADEMCO Accord Dokumentacja Pobierz pdf (Strona 19)

Programming Groups 1, 2 and 3

Programming Groups one to three are used to programme the eight zones for each of

the three setting modes: Full, Part and Night Set. This allows zones to be bypassed or

assigned different functions for each of the three setting conditions. The available

zone types are:

No. Zone Type No. Zone Type

0. Not Used 4. Walk Through

1. Final Exit 5. 24 Hour Tamper

2. Keyswitch 7. PA Audible

3. Intruder 9. Fire

Zone Programming  Group 1 Full Set

 The first digit entered is 1 for Full Set.

 The second digit is the zone number 1  8.

 The third digit is the zone type, see above.

Example: In Programming Mode press 1 + 2 + 3. This

programmes zone 2 as an Intruder zone in the Full Set

mode and is accompanied by two beeps, indicating a

correct entry.

Note: The default programming is shown in brackets

in Table 3.1.

To review the programming: press the 1 key followed

by 00. The zone type is indicated on the keypad zone

LEDs (18) for zone 1 (accompanied by one beep),

then zone 2 (accompanied by one beep), etc.

Table 3.1 Full Set Group.

Zone Programming  Group 2 Part Set

 The first digit entered is 2 for Part Set.

 The second digit is the zone number 1  8.

 The third digit is the zone type.

Example: In Programming Mode press 2 + 2 + 3. This

programmes zone 2 as an Intruder zone in the Part Set

mode and is accompanied by two beeps, indicating a

correct entry.

Note: The default programming is shown in brackets

in Table 3.2.

To review the programming: press the 2 key followed

by 00. The zone type is indicated on the keypad zone

LEDs (18) for zone 1 (accompanied by a beep), then

zone 2 (accompanied by a beep), etc.

Table 3.2 Part Set Group.

TESLLUF

PUORGENOZ

ENOZ

EPYT

11)1(

12 )4(

13 )3(

14 )3(

15 )3(

16 )3(

17 )3(

18 )3(

TESTRAP

PUORGENOZ

ENOZ

EPYT

21)1(

22 )4(

23 )3(

24 )3(

25 )3(

26 )3(

27 )3(

28 )3(

Group 4  Option 5 External Bells in Part Set

When enabled (set to 1) the Bell and Strobe outputs activate during an alarm condi-

tion when the system is Part Set  enabled by default.

Internal sounders always sound.

Group 4  Option 6 External Bells in Night Set

When enabled (set to 1) the Bell and Strobe outputs activate during an alarm condi-

tion when the system is Night Set  enabled by default.

Internal sounders always sound.

Group 4  Option 7 Trigger Output

The Accord control panel has one programmable trigger output. The available pro-

gramming options are outlined below. This option defaults to 473.

Table 3.6 Part Set Exit Warning 440 Silent.

Table 3.7 Part Set Exit Warning 441 Buzzer Only.

Table 3.8 Part Set Exit Warning 442 Keypad and Sounder.

—GNINRAWTIXETESTRAP TNELIS044

ENOTTIXE

TLUAF

ENOT

TLUAF

TAENOT

FODNE

EMITTIXE

TROFMOC

ENOT

teStraPenoNenoNylnodapyeKylnodapyeK

teSthgiNenoNenoNylnodapyeKylnodapyeK

—GNINRAWTIXETESTRAP DNAREZZUBDAPYEK244

REDNUOSLANRETNI

ENOTTIXE

TLUAF

ENOT

TLUAF

TAENOT

FODNE

EMITTIXE

TROFMOC

ENOT

teStraPhtoBhtoBhtoBhtoB

teSthgiNenoNenoNhtoBhtoB

—GNINRAWTIXETESTRAP YLNOREZZUBDAPYEK144

ENOTTIXE

TLUAF

ENOT

TLUAF

TAENOT

FODNE

EMITTIXE

TROFMOC

ENOT

teStraPylnodapyeKylnodapyeKylnodapyeKylnodapyeK

teSthgiNenoNenoNylnodapyeKylnodapyeK

1 2 ... 14 15 16 17 18 19 20

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO Accord Dokumentacja Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Accord