ADEMCO Accord Instrukcja Instalacji Pobierz pdf (Strona 9)

Section 1: Wiring Regulations and

Safety Compliance

General Information

It is essential that this product is installed correctly, in particular with respect to a

persons safety and connection to the mains electricity supply. This product is not

suitable for installation, maintenance or connection by the user. A competent, quali-

fied installer, with for example BS5750 or NACOSS approval, must carry out installa-

tion and maintenance.

Compliance

The Accord xpC is compatible with the relevant parts of the following standards:

• BS 4737

• EN 60950

• CTR 21

• CE Standards (EN 50130-4)

• EN 41003

It is a condition of the product’s approval that the installation complies with the

following:

Siting

The control panel enclosure must be sited indoors in a secure area where it cannot be

readily interfered with. There must be adequate ventilation, ample light and easy

access for servicing and maintenance. It is not suitable for siting externally or in harsh

environments where it could be subject to high humidity, extremes of temperature,

chemical atmospheres, high dust levels, or in a position where it may be subject to

being dripped on, or splashed by, water or other fluids.

The enclosure base must be securely fixed to a vertical, smooth, solid surface that is a

part of the fabric of the building. The position chosen must allow the cabinet door to

be removed and allow unhindered access for installation and maintenance.

Ventilation

While the control panel has been designed so that no part attains an unsafe tempera-

ture it is important that adequate ventilation is provided around the cabinet, therefore

the cabinet should not be positioned close to heat-radiating equipment or other sources

of heat.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 77 78

Brak uwag

ADEMCO Accord Instrukcja Instalacji Strona 9