ADEMCO Accord Instrukcja Instalacji Strona 60
- Strona / 78
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
52
High Security Mode (6128RFH only)
For programming secure fobs onto the Accord xpC: (required for DD243)
1. Learn the fob onto the 6128RFH keypad first as follows:
(1) With the panel in programming mode, enter the keypad programming mode
by opening and closing the keypad tamper and pressing 1 & 2
simultaneously. The display should alternate between 00 and --.
(2) Press 0 (High Security mode) and the display will show En.
(3) Press 1 to enable the High Security mode (0 is disabled) then Ø to continue.
(4) Press 8 to select Fob Learn mode and the display will show dx and -- (where
x is the slot on the keypad from 1 to 8.
(5) Press all 4 buttons on the fob and the display will show dx followed by the
serial number.
(6) Press Ø to accept the programming or # to reject and retry.
(7) Press the Ø key to finish.
(8) Repeat for each keyfob to be used then press Ø until the keypad returns to
normal mode.
2. Proceed as per Standard mode from point 1 above.
Note: If a keyfob is programmed into the panel when it has not been programmed into
the keypad it will not operate in High security mode.
Deleting Keyfobs
To delete a fob, enter code, 8, user number. Wait for the double beep, then press the
Ø key. The fob is now deleted.
6128RFH Keypad Operation
The following notes cover the use of the 6128RFH keypad with the Accord Panel.
There are some functional differences between this keypad and the other Accord
keypads, mostly concerning the keypad display. The main user functions are identical.
There is a separate user manual included to cover the 6128RFH keypad.
Hot Keys
The hot key functions use different buttons on the 6128 Keypad. They are detailed in
the user manual. However, it is strongly advised that the Easy Set function is not
used when the hot keys are enabled. This is to avoid the possibility of a user acciden-
tally activating a fire alarm when attempting to Night set the system. In Easy set,
Night set is # then 3. However # & 3 together activates the fire function. Easy set is
defaulted off. If both functions are required, then please connect an Accord LCD
keypad (2011-129), along with the 6128, and have the LCD keypad as the main users’
keypad.
- Installation Manual 1
- Contents 3
- Safety Compliance 9
- Mains Supply Connections 10
- Telecoms Approvals 11
- Zone Cable Type 12
- Equipment Electrical Rating 13
- Ancillaries Pack 15
- Initial Mounting 15
- SW1 — Accord Tamper 16
- To remove the PCB: 16
- To replace the PCB: 16
- Tip: Use 18
- ALARM TAMP 19
- XPC to the PSTN 20
- Final Mounting 22
- Testing the Installation 23
- Table 3.1 Programming Groups 26
- Part and Night Set) 27
- Table 3.4 Night Set Zones 28
- Programming System Options 30
- Table 3.7 Bell Cut-off Times 31
- 0. Set (on in any set state) 32
- Table 3.12 No of Rings 38
- 0 = Comms Disabled 39
- 1 = High Speed (8 channel) 39
- 2 = Contact I.D 39
- 1 Before Entry 40
- 2 Except Entry 40
- 3 Always 40
- 1 Always disable 42
- 2 Full set only 42
- 3 During Entry 42
- 0 Single Report 43
- 1 Dual Report 43
- Table 3.14 Group 8—Triggers 47
- Table 3.16 System Parameters 49
- Zone Type Definitions 54
- Instructions 57
- Wire Free Programming 58
- From programming mode: 59
- Site Surveying 61
- Walk Test 61
- Reprogramming Your Code 65
- Programming New User Codes 66
- Printing the Event Log 67
- What they Mean 69
- Appendix A: Specifications 71
- Physical Width: 120 mm 72
- Height: 120 mm 72
- Depth: 25 mm 72
- PROGRAMMING FORM 74
- IP1-1232 Issue 4 75
- Redditch, B98 9HE 76
- IE1-1232 Issue 3 78
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Accord
(8 strony)
(56 strony)Philips 15PF5120/28B manuals
Owner’s manuals and user’s guides for Video Philips 15PF5120/28B.
We providing 1 pdf manuals Philips 15PF5120/28B for download free by document types: User Manual
Komentarze do niniejszej Instrukcji