ADEMCO VISTA-250FBP Podręcznik Użytkownika Strona 23
- Strona / 80
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
– 23 –
Accessing Other Partitions
To Access another Partition
Each keypad is assigned a default partition for display purposes, and will
show only that partition's information. But, if the user is authorized, a
keypad in one partition can be used to perform system functions in other
partitions by using the GOTO command. Note that only those partitions
authorized and programmed by the installer can be accessed in this manner.
To GOTO another partition:
READY
1. Enter your security code, then press ✳ + partition number (0-8).
Entering partition number 0 will return the keypad to its original
partition.
2.
LOG-ON TO AAAA
PART. X COMPLETE
The keypad will remain in the new partition
until directed to go to another partition, or
until 2 minutes have elapsed with no keypad
activity.
AAAA = alpha descriptor programmed by the
installer
X = partition number
Global Arming
The Global Arming option may be assigned for use by some users. If Global
Arming was enabled for use with your security code, a keypad prompt
(message) shown below appears after pressing one of the arming function
keys (STAY, INSTANT, AWAY, MAXIMUM, OFF).
ARM P 1 2 3 4 5 6 7 8
HIT 0-8 X X X - - X - -
The prompt displays all the partitions. The user
may only arm/disarm the partitions they are
assigned access to.
To select the partition(s) that are to be armed,
enter the desired number 1-8. An "X" will appear
under that partition. Entering a partition's
number again will delete the “X” and that
partition will not arm when this prompt is exited.
Pressing 0 will turn all partitions the user is
assigned access to on/off.
When completed, press ✳ to exit. All the partitions
with the “X” will then arm/disarm.
- VISTA-128FBP 1
- VISTA-250FBP 1
- TABLE OF CONTENTS 3
- System Overview 5
- System Overview (cont’d) 6
- About The Keypads 10
- Functions of the Keypad 11
- 6160-00-001-V0 12
- Entry/Exit Delays 15
- General Information 16
- Duress Code 16
- Quick Arming 16
- Authority Levels 17
- To Exit User Edit Mode 18
- To Add a User 19
- CODE 21
- READY 23
- Master Keypad Operation 24
- Common Lobby Operation 26
- Checking For Open Zones 28
- BYPASS 30
- (With Entry Delay ON) 33
- STAY 33
- Arming Perimeter Only 34
- (With Entry Delay OFF) 35
- INSTANT 35
- AWAY 36
- (with Entry Delay OFF) 37
- MAXIMUM 37
- Quick Exit 38
- Using the 1 OFF Key 39
- Memory of Alarm 39
- GREEN RED 40
- Chime Mode 41
- Panic Keys 43
- Relay Control 44
- Using #70 Relay Menu Mode 45
- Using Schedules 46
- Using Schedules (cont’d) 47
- Programming Device Timers 49
- Event Log Procedures 55
- (To Be Conducted Weekly) 57
- Fire Alarm System 58
- Fire Alarm System (cont’d) 59
- Trouble Conditions 60
- Trouble Conditions (cont’d) 61
- Emergency Evacuation 62
- Maintaining Your System 63
- Routine Care 64
- (cont’d) 67
- (Alpha Display Keypads) 68
- WARNING! 72
- ÊK0377V2eŠ 80
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO VISTA-250FBP
(8 strony)
(56 strony)Philips 15PF5120/28B manuals
Owner’s manuals and user’s guides for Video Philips 15PF5120/28B.
We providing 1 pdf manuals Philips 15PF5120/28B for download free by document types: User Manual
Komentarze do niniejszej Instrukcji