– 7 –
RESTORE REPORT CODES (
✱
70 –
✱
76)
†
✱
70
ALARM RESTORE RPT CODE
[0]
2nd digit is automatically sent as the 2nd digit of
the zone alarm report code programmed in
✱
56,
if expanded or 4+2 reporting is selected.
✱
71
TROUBLE RESTORE RPT CODE
[00]
|
✱
72
BYPASS RESTORE RPT CODE
[00]
|
✱
73
AC RESTORE RPT CODE [00]
|
✱
74
LOW BAT RESTORE RPT CODE [00]
|
✱
75
RF XMTR LO BAT RST RPT CODE
[00]
|
✱
76
TEST RESTORE RPT CODE [00]
|
DAYLIGHT SAVING TIME (
✱
77 –
✱
78) DYNAMIC SIGNALING (
✱
79)
✱
77
DAYLIGHT SAVING TIME [4,10]
|
†
START/END MONTH
0 = Disabled; 1 = Jan; 2 = Feb; 3 = Mar….
10 = Oct; 11 = Nov; 12 = Dec.
(Enter 0-9); #+10 = 10; #+11 = 11; #+12 = 12
✱
78
DAYLIGHT SAVING TIME [1,5]
|
†
START/END WEEKEND
0 = Disabled; 1 = First; 2 = Second; 3 = Third;
4 = Fourth; 5 = Last; 6 = Next to Last;
7 = Third to Last
1st Entry 2nd Entry
✱
79
DYNAMIC SIGNALING [0]
†
[0]
†
DS Delay DS Priority
D S Delay; 0-15 times a 15-sec delay
1 = 15 secs; 2 = 30 secs; 3 = 45 secs;
4 = 60 secs…etc.
0 = No delay. (Reports are sent to both
the Primary Phone No. and LRR).
For UL installations, set for 0 = No delay
D S Priority; 0 = Send message to Primary
Phone No. first;
1 = Send message to LRR first.
†
Entry of a number other than the one specified will give unpredictable results.
OUTPUT AND SYSTEM SETUP (
✱
80 –
✱
93)
✱
80
OUTPUT RELAYS AND
POWERLINE CARRIER
DEVICES
✱
81
ZONE LISTS FOR OUTPUT
DEVICES
Program only if
Relays and/or
Powerline Carrier
devices are to be
used. See page 9.
✱
82
CUSTOM ALPHA EDITING
(
Also entered from field
✱
56)
See procedure in instructions.
✱
84
AUTO STAY ARMING
[0]
0 = no; 1 = yes
✱
85
CROSS ZONE TIMER (in seconds)
[0]
0 = 30
1 = 45
2 = 60
3 = 90
4 = 120
5 = 180
6 = 240
NOTE:
This field (
✱
85
) and Zone List 04 are not to be
used in UL installations.
✱
87
ALARM PAGER DELAY TIME
[3]
0 = none
1 = 1 minute
2 = 2 minutes
3 = 3 minutes
✱
88
PAGER CHARACTERS
(16 digits as user decides)
| | | | | | | | | | | | | | | |
(See field
✴
41 for programming instructions)
✱
89
EVENT LOG 80% FULL RPT CODE [00]
|
✱
90
EVENT LOGGING [3]
0 = None; 1 = Alarm/Alarm Restore;
2 = Trouble/Trouble Restore; 4 = Bypass/Bypass
Restore; 8 = Open/Close.
Example:
To select “Alarm/Alarm Restore” and
“Open/Close,” enter 9 (1 + 8); to select all, enter #+15.
Note:
System messages are logged when any
non-zero selection is made.
✱
91
OPTION SELECTION (AAV) [8]
0 = None;
4 = AAV;
8 = Enable Exit Delay Restart;
12 = Both enabled.
0 for UL installations.
✱
92
PHONE LINE MONITOR ENABLE [0]
0 = Not used
1 = Keypad display when line is faulted
2 = Keypad display plus keypad trouble sound
3 = Same as “2,” plus Device #2 STARTS. If armed,
external sounder activates also.
Note:
Device #2 must either be programmed to be
STOPPED in field
✱
80 or STOPPED by
Code + # + 8 + 2.
✱
93
SWINGER SUPPRESSION [0]
0 = Unlimited; 1 - 15 = Number of Alarms
(0 - 9; #+10 = 10; #+11 = 11; #+12 = 12;
#+13 = 13; #+14 = 14; #+15 = 15)
0 for UL installations.
(110 strony)
(64 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji