ADEMCO Alpha Vista Console Instrukcja Obsługi Pobierz pdf (Strona 3)

Zone Characteristics

Zone 1: Programmable Zone, may be used as EOLR supervised Fire Zone

(supports 2-wire Smoke Detectors), or may be used as a non-fire

zone with N.C.

contacts only. 350-500 msec response.

Zones 2–8: Programmable Zones, EOLR supervised, 350-500 msec response.

Zone 9:

Programmable Zone, N.C. contacts only, fast 10-15 msec response.

Back-up 12V DC Battery

Mounted internally.

Rechargeable 12-volt,

4 AH Lead Acid (Ademco No. 486 or

YUASA NP412).

DC Puuer Pack

Plug-in Power Pack (DC power converter).

Plugs into unstitched 2-pin 110 volt

AC outlet providing 24–hour service.

Power Pack (1350) supplies unregulated

18VDC output (700 mA max.) for powering the Control.

REMOTE PROGRAMMING AND CONTROL

The No. 4140 allows the installer to call it using switched network phone lines

so that the control/canmunicator can be remotely programmed and/or canmanded

from a No.

699MD Intelligent Programmer or an IBM compatible Personal Computer

(Pc).

See Note 2 under Remote Capabilities in this section.

Accessing of the No. 4140 from a remote location is protected against compromise

by someone

attempting to defeat the system, using 4 levels of security

protection:

Security Code Handshake: An 8–digit Central Station ID code must be matched

between the No. 4140 and the Central Station.

Hang-up and call back:

Calling the No. 4140 does not directly SI.1OW

programming,

as a successful handshake merely results in the No. 4140

breaking the phone

line connection and then calling back the (internally

stored) central station service phone number*.

Data Encryption:

Data passed between the central station and the No.4140

is encrypted for security so that it is very difficult for a foreign device

tapped into the phone line to take over canmunication and substitute system

compromising information.

Central Station Advisory Note:

Any condition that causes the system to

initiate a

call back to a telephone number from which it can be

reprogrammed or commanded (in fact, even for a local reprogramming of the

EEPROM) causes a unique report to be sent to the central station’s alarm

logging digital receiver.

* Note:

In situations where a service person is

on site and the system is

installed inside a PABX,

it is possible to initiate a download from

the protected premises by keying [installer or master security code] +

[#1 + [11.

1 2 3 4 5 6 7 8 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

ADEMCO Alpha Vista Console Instrukcja Obsługi Strona 3

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Alpha Vista Console