ADEMCO Vista-10P Podręcznik Użytkownika Strona 38
- Strona / 64
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
– 38 –
Trouble Conditions (Continued)
Trouble Conditions (Continued)Trouble Conditions (Continued)
Trouble Conditions (Continued)
Words or letters in parentheses ( ) are those that are
displayed on Alpha Display keypads.
Other Trouble
Displays
* Any “beeping” that
accompanies a trouble
display can be stopped
by depressing any key
on the keypad or by
entering an OFF
sequence (code + OFF)
** Not all systems use
wireless sensors.
COMM. FAILURE Indicates that a failure has occurred in
(or FC) the telephone communication portion of
your system.
CALL FOR SERVICE.
SYSTEM LO BAT Indicates that a low system battery
(or BAT with no condition exists. Display is
zone No.) accompanied by "beeping"* at the
keypad. If this condition persists for
more than one day (with AC present),
CALL FOR SERVICE.
LO BAT Indicates that there is a low battery
+ zone descriptor condition in the wireless transmitter**
(or BAT with number displayed (00 is RF keypad).
zone No.) Accompanied by a single "beep"
*
(about
once every 30 seconds) at the keypad.
Either replace the battery yourself, or
CALL FOR SERVICE. If the battery is
not replaced within 30 days, a CHECK
display may occur.
Rcvr Jam Wireless part of the system is experiencin
g
(or CHECK 90) RF interference which may impede
reception from wireless sensors.**
ALARM 1xx
FAULT 1xx
CHECK 1xx
(or 91)
Indicates a communication problem
between the control and a connected
device (e.g., RF receiver, zone expander)
where the “xx” indicates the device
address. CALL FOR SERVICE.
MODEM COMM
(or CC)
Indicates that the control is on-line with
the Central Monitoring Station's remote
computer.
The control will not report system
activity while on-line. Wait a few minutes
— the display should disappear.
BELL FAILURE Indicates that the wiring connection to
(or CHECK 70) the external sounder is at fault (open or
shorted). Accompanied by “beeping” at
the keypad. CALL FOR SERVICE.
- ADEMCO VISTA-10P 1
- ADEMCO VISTA-10PSIA 1
- IMPORTANT! 2
- About This Manual 2
- Table of Contents 3
- System Overview 5
- (Continued)(Continued) 6
- General Information 8
- About The Keypads (Continued) 9
- Functions of the Keypads 10
- ✱] key, and 11
- Entry/Exit Delays 12
- (Contin(Contin 13
- (Continued) 13
- Arming the System 15
- GREEN RED 18
- Using the [OFF] key 19
- Bypassing Protection Zones 20
- Chime Mode 22
- Chime ModeChime Mode 22
- (Master Code) 23
- Panic Keys 24
- Panic KeysPanic Keys 24
- About Macro Keys 25
- (cont.)(cont.) 26
- Using Device Commands 27
- Paging Feature 28
- Paging FeaturePaging Feature 28
- (Cont.)(Cont.) 31
- Scheduling 32
- SchedulingScheduling 32
- Scheduling (continued) 33
- Event Logging Procedures 34
- Table of Event Log Codes 35
- Testing the System 36
- Trouble Conditions 37
- Any “beeping” that 38
- Total Power Failure 39
- Maintaining Your System 40
- (zone 95) 42
- (zone 99) 42
- (zone 96) 42
- Fire Alarm System (Continued) 43
- Emergency Evacuation 44
- Fixed-Word Display Keypads 46
- Alpha Display Keypads 47
- FCC Part 68 49
- Industry Canada 49
- Industrie Canada 49
- User Setup 51
- Paging Setup 51
- List of Output Devices 51
- – NOTES – 52
- A. GENERAL INFORMATION: 53
- (cont.) 54
- LIMITATIONS OF THIS SYSTEM 55
- – Notes – 56
- ÊK0736V4jŠ 64
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ADEMCO Vista-10P
(112 strony)
(56 strony)
(16 strony)Triton 97XX Configuration Manual podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Ekwipunek Triton 97XX Configuration Manual.
Dostarczamy 1 pdf podręczników Triton 97XX Configuration Manual do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Komentarze do niniejszej Instrukcji